So, according to Emily Sohn of Discovery News, the main reason that zebras developed their stripes is to ward off attacks from virulent flies by reflecting light with their black and white pattern.
Now, my bathroom is not black and white striped nor is it even half as awesome as a zebra, but it ranks a close second and it even reflects light quite beautifully. Yeah?
My original inspiration came from the lovely couple over at
Young House Love. Of course, those two are professionals as far as I'm concerned! I, on the other hand, am not a professional, and I had to tackle this feat independently. My husband refuses to paint unless it's spray paint. The turd. They include a wonderful tutorial on their blog, but I added some steps and tips that I felt were worth mentioning if you really aren't a super experienced painter.
Materials that I used:
- Frog's tape (better than blue painter's tape)
- Mini roller (a gift from the heavens)
- Mini paint tray
- Two paint colors (one lighter and another one shade darker) with paint sticks
- small paint brush (for corners and edges)
Step 1:
Choose two colors. I like that they chose two lighter colors. I am hopelessly devoted to
Behr's paint and primer in one, so I went with two of their colors. I already had a lot of leftover
Pillar White from our bedroom paint job, so I used that as one of the two colors. I then went to Home Depot and found one shade darker,
Aged Parchment (how fitting for me as an English teacher!)
Note:
My bathroom is small. I really needed only one gallon of the base color and a pint of the other, but I just went with one gallon of each, just in case. Plus, I figured you could use white/cream for anything. I bought both in semi-gloss.Step 2: If you like a really clean slate,
take all hardware off of your walls. Then
spackle and sand (I used
100 grit in the blocks) all of your holes. We had a lot of holes, thanks to Jeff's run-in with an unruly shelf. Ugh.
Note: If your bathroom is small with no windows, and you do not want to suffocate yourself or wear a particle mask, take off the door. I did this step by myself, and I am certainly no body builder. Just make sure that you start unscrewing the hinges starting at the bottom. If you start at the top, as I so stupidly did, the door starts to pop off while you're grunting and actually fake crying as you unscrew the bottom screws. Not a good situation. Either way, taking off the door was the best decision I made during this process. Step 3: Once all of the spackling, sanding, and nearly being killed by the door is complete,
paint your walls the lighter color (for me, it was
Pillar White). I also painted the ceiling and baseboards because they were another white, and I wanted a more unified look. I painted three coats because that's how I roll.
Step 4: Once the paint dries,
measure from your ceiling to the top of the baseboard. The YHL couple says to
- divide that number (mine was somewhere between 92 and 93, and the fractions nearly split my brain)
- by how many total stripes you want (I wanted 12)
- and subtract one (so I end up with 11). The minus one still confuses me.
I ended up with eleven stripes, which I like because I started and ended with the same color. Either way, I wanted my stripes to be somewhere around 8" in height, so I made the math work in my favor. Don't ask me to explain the math. I teach English, not Math, for many good reasons.
Step 5: Mark off where you want your stripes. I did this with pencil marks, and
because I'm neurotic, I proceeded to use a level to draw light lines around the room so that all of my lines would be straight. I did not want to do all of this work to wind up with slanted lines. Though this took a lot of patience (or insanity), I'm glad that I did it! Patience
is a virtue, folks.
Step 6: Mark a P (for paint) inside all of the lines that you want to paint. (I knew I'd accidentally forget and then curse myself.)
|
See the P? |
Step 7: Using painter's or Frog tape (we like the green Frog tape), you will complete this next, mildly complicated step.
- Put tape on the OUTSIDE of the lines that you want to paint your darker color (see the darker ones that I painted? The tape lets me know to paint in between those two strips of tape.)
- Put tape on the INSIDE of the lines that you do not want to paint (see how the parts that I did not paint are thinner than the ones I did paint? You already painted this color as your base coat, so you do not want to paint it again.)
- The wider boxes will remind you to paint them, and the thinner boxes will remind you that the base coat is already the color that you want it to be.
- Essentially, you're just trying to mark off all of the spots that need to be painted.
Step 8: Paint all of your wider boxes/lines (whatever you'd like to call them). I did three coats, and I used a mini roller. I painted the lines with my mini roller and then did the corners with a small paintbrush so that I could start my second coat with the mini roller as soon as I did all of the corners with the paintbrush.
IMPORTANT NOTES:- Make sure all of your tape is flush with the wall so that no paint can seep in between it and the wall.
- As soon as you finish your final coat, REMOVE THE TAPE. It makes your lines even and doesn't pull off paint/wall with it. Important.
- Be sure that you paint over the tape a little bit so that your line does not fade before it even gets to the tape. You want to paint so that the lines end up crisp and that there are no white spots showing through.
|
See our old, ugly light fixture? Blech. |
|
Up close, she's no prettier. |
|
See our new fixture? She was only $45 from Lowe's. You can build your own light fixtures there! I love that it makes a rain-like pattern on the wall :) |
|
Here she is without the light on. Still lovely. |
|
And one more. |
|
These are vinyl tiles. They fake me out all of the time; I keep thinking that they're real tiles, but they are WAY prettier than the original (no pictures, sorry), took little effort, and cost less than $20. |
|
Finish product of the wall. |
|
I hung a new mirror ($30 from Target), hung a new towel hook ($2 on clearance from Target), spray painted the switch plates oil rubbed bronze, and bought a new soap dispenser ($7 from Target). |
|
New rug ($13 from Target), new TP tower ($9 from Marshall's), and new floor ($18 from Lowe's)
|
Price Breakdown:
- Aged Parchment paint $30
- Pillar White paint ($0 because I already had it from 3 years ago)
- Frog tape $5
- Mini roller tray $2
- Mini roller ($0--already had it)
- 2.5 thin angle brush $9.50
- Sanding stuff $6.27 (already had the spackle)
- Light fixture $45 (including bulbs)
- Mirror $11 (used a gift card to help cut the $30 cost)
- Towel hook $2
- Soap dispenser $7
- Rug $13
- Floor $18
- TP tower $9
- New cabinet knobs $7.50
- New 1/4 rounds $1.18
- ORB door stop $3
- New carpet trim (other was gold and ugly) $6
TOTAL: $175.45 -- not too shabby for what feels like a brand new bathroom!
NOTES:
- We'll also be installing the new faucet (we already had it, and it was on super clearance 3 years ago; I don't remember its price)
- We'll also be visiting Ikea to put a shelf under and to the left of the mirror.
|
My outfit that day ended up matching the bathroom. I didn't realize it until I had left the house. HA. |